Booting a Live ISO Image from Network¶
In KIWI NG, live ISO images can be configured to boot via PXE. This functionality requires a network boot server setup on the system. Details how to setup such a server can be found in Setting Up a Network Boot Server.
After the live ISO was built as shown in Build an ISO Hybrid Live Image, the following configuration steps are required to boot from the network:
Extract initrd/kernel From Live ISO
The PXE boot process loads the configured kernel and initrd from the PXE server. For this reason, those two files must be extracted from the live ISO image and copied to the PXE server as follows:
$ mount LimeJeOS-Leap-15.1.x86_64-1.15.1.iso /mnt $ cp /mnt/boot/x86_64/loader/initrd /srv/tftpboot/boot/initrd $ cp /mnt/boot/x86_64/loader/linux /srv/tftpboot/boot/linux $ umount /mnt
This step must be repeated with any new build of the live ISO image
Export Live ISO To The Network
Access to the live ISO file is implemented using the AoE protocol in KIWI NG. This requires the export of the live ISO file as remote block device which is typically done with the vblade toolkit. Install the following package on the system which is expected to export the live ISO image:
$ zypper in vblade
Not all versions of AoE are compatible with any kernel. This means the kernel on the system exporting the live ISO image must provide a compatible aoe kernel module compared to the kernel used in the live ISO image.
Once done, export the live ISO image as follows:
$ vbladed 0 1 INTERFACE LimeJeOS-Leap-15.1.x86_64-1.15.1.iso
The above command exports the given ISO file as a block storage device to the network of the given INTERFACE. On any machine except the one exporting the file, it will appear as
/dev/etherd/e0.1once the aoe kernel module was loaded. The two numbers, 0 and 1 in the above example, classifies a major and minor number which is used in the device node name on the reading side, in this case
e0.1. The numbers given at export time must match the AOEINTERFACE name as described in the next step.
Only machines in the same network of the given INTERFACE can see the exported live ISO image. If virtual machines are the target to boot the live ISO image they could all be connected through a bridge. In this case INTERFACE is the bridge device. The availability scope of the live ISO image on the network is in general not influenced by KIWI NG and is a task for the network administrators.
Setup live ISO boot entry in PXE configuration
Edit the file
/srv/tftpboot/pxelinux.cfg/defaultand create a boot entry of the form:
LABEL Live-Boot kernel boot/linux append initrd=boot/initrd rd.kiwi.live.pxe root=live:AOEINTERFACE=e0.1
The boot parameter
rd.kiwi.live.pxetells the KIWI NG boot process to setup the network and to load the required
The boot parameter
root=live:AOEINTERFACE=e0.1specifies the interface name as it was exported by the vbladed command from the last step. Currently only AoE (Ata Over Ethernet) is supported.
Boot from the Network
Within the network which has access to the PXE server and the exported live ISO image, any network client can now boot the live system. A test based on QEMU is done as follows:
$ qemu -boot n